Previous
Every time an original page changes, a slip sheet is inserted. You can also print on the inserted slip sheet.
Since a slip sheet is inserted for every page, you can protect printed surfaces. This function is useful in copying onto transparencies.
Before using this function, select the tray for slip sheets under [Tray Paper Settings]. For details, see "Changing Tray Paper Settings", Preparation.
When copying onto transparencies
Copy
Blank
If the Duplex function is selected, cancel the setting.
Press [Cover/ Slip Sheet].
Select [Copy] or [Blank] for the slip sheets, and then press [OK].
Select the main sheet tray that contains the paper to copy the originals.
When copying onto transparencies, use the multi bypass tray (Tray A).
The slip sheets should be the same size and orientation as the copy paper or the transparencies.
When loading transparencies on the multi bypass tray (Tray A), press [Tray A] and select [Transparency] in [Paper Type]. For details, see Copying onto transparencies.
If the type of paper is different between main sheets and slip sheets, copy paper is output in the tray that can stack both sheets.
If you do not copy onto slip sheets, they are excluded from the number of copies counted.
