Previous
You can copy designated pages onto designation sheets.
Before using this function, select the tray for designation sheets under [Tray Paper Settings]. For details, see "Changing Tray Paper Settings", Preparation.
Press [Cover/ Slip Sheet].
Press [Designate / Chapter].
Press [Designation Sheet Copy].
Enter the sheet number of the first original with the number keys.
To select chapters 21 to 40, press [21–40].
When eight trays are installed, pages 21 to 40 are divided into [21–30] and [31–40].
Press [Page to Page].
Enter the sheet number of the last original with the number keys.
Select the designation sheet tray that contains the paper for the designation sheets, and then press the [
] key.
To specify another page location, repeat Steps 4 to 7.
Up to 100 locations can be specified.
Select the main sheet tray that contains the sheet to copy the originals.
Press [OK] twice.
When this function is combined with Duplex, the first page of the designated pages is copied on the front side of a designation sheet.
The designation sheets should be the same size and orientation as the main sheet.
