Skip header
 

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the detected original size and the reproduction ratio you select.

Original sizes and orientations that can be used with Auto Paper Select are as follows (when copied at a ratio of 100%):

Region A icon(mainly Europe and Asia)

Original location

Original size and orientation

Exposure glass

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5Portrait, 81/2 × 13Landscape

ADF

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5PortraitLandscape, B6 JISPortraitLandscape, 11 × 17Landscape, 81/2 × 11PortraitLandscape, 81/2 × 13Landscape

Region B icon(mainly North America)

Original location

Original size and orientation

Exposure glass

11 × 17Landscape, 81/2 × 14Landscape*1, 81/2 × 132/5Landscape*1, 81/2 × 11PortraitLandscape, 51/2 × 81/2Portrait

ADF

11 × 17Landscape, 81/2 × 14Landscape*1, 81/2 × 132/5Landscape*1, 81/2 × 11PortraitLandscape, 51/2 × 81/2PortraitLandscape, 81/2 × 101/2Landscape, 10 × 14Landscape, A3Landscape, A4PortraitLandscape

*1 You can switch the initial setting to determine whether the machine detects either 81/2 × 14Landscape or 81/2 × 132/5Landscape.

1Make sure that [Auto Paper Select] is selected.

Operation panel screen illustration

2Place the originals, and then press the [Start] key.

Note

  • Only the trays that satisfy all the following conditions can be selected in Auto Paper Select mode. Trays with a lock mark (Operation panel screen illustration) will not be automatically selected. For details, see "Changing Tray Paper Settings", Preparation.

    • [Plain Paper] or [Recycled Paper] is selected in [Paper Type] under [Tray Paper Settings]

    • [Paper Weight 2 63.1–80.0g/m2] or [Paper Weight 3 80.1–105.0g/m2] is selected in [Paper Weight] under [Tray Paper Settings]

    • [Yes] is selected in [Apply Auto Paper Select] under [Tray Paper Settings]

Related topics

Rotate copy
PreviousNext