Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains details that identify the region your machine belongs to. Read the label.
![Main unit illustration](../../spec/image/dzw175.gif)
The following information is region-specific. Read the information under the symbol that corresponds to the region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
CODE XXXX -27, -29, -65
220–240 V
(mainly North America)
If the label contains the following, your machine is a region B model:
CODE XXXX -17, -18
120–127 V
Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch units.
If your machine is a region A model and "CODE XXXX -27, -65" is printed on the label, see "
(mainly Europe)" also.
If your machine is a region A model and "CODE XXXX -29" is printed on the label, see "
(mainly Asia)" also.