Creating a Poster by Dividing and Tiling an Original across Multiple Sheets of Paper
You can create a copy as large as a poster by bonding multiple sheets on which enlarged images are copied (Poster).
Bond them with an overlap of 15 mm (0.59 inch) on the margin of each sheet.
![](../../copy/image/dzw220.gif)
In the following cases, you cannot copy by specifying [Poster]:
When scanning an original using the ADF
When using the paper set in the bypass tray
When specifying Duplex Copies
When Color Mode is set to [Auto Color Select]
Press [Copy] on the Home screen.
![Operation panel screen illustration](../../copy/image/icon_homescreen_en_mts006.gif)
Select a color mode other than [Auto Color Select] on the Copy screen.
![Operation panel screen illustration](../../copy/image/met3cpy-en028.gif)
Press [Paper Select] to select the paper tray loaded with the paper to use.
![Operation panel screen illustration](../../copy/image/met3cpy-en003.gif)
Press [Poster] on the Copy screen.
![Operation panel screen illustration](../../copy/image/met3cpy-en055.gif)
If the key is not displayed, select it from [2 Sided/Combine].
Specify the number of sheets of paper to use in one poster, and then press [OK].
![Operation panel screen illustration](../../copy/image/dzx222.gif)
Place the original on the exposure glass, and then specify [Original Orientation].
Press [Start].