Designate

Use this function to have certain pages of your original copied onto designation sheets or to insert a designation sheet for each page specified.

  • Copy
    Illustration of Designate

  • Blank
    Illustration of Designate

Before using this function, select the tray for designation sheets in the following settings. For details, see User Guide of your device.

  • Settings screen type: Standard
    [Tray/Paper Settings]

  • Settings screen type: Classic
    [Tray Paper Settings]

Important

  • You cannot specify the bypass tray as the main sheet tray.

  1. Press [Cover/Slip Sheet].
    Operation panel screen illustration

  2. Press [Designate / Chapter].
    Operation panel screen illustration

  3. Select [Designate: Copy] or [Designate: Blank].

  4. Press the key to select the chapter number.
    To select pages 11 to 20 (chapter), press [11–20].
    Operation panel screen illustration

  5. Enter the page location of the first page of the chapter with the number keys, and then press [Sharp].

  6. To specify another page location, repeat Steps 3 to 5.
    Up to 20 locations can be specified.

  7. Select the main sheet tray that contains the paper to copy the originals.

  8. Press [OK] twice.

Note

  • The designation sheets should be the same size and orientation as the main sheets.

  • If you select [Designate: Blank], the specified pages will be excluded from the copy count.

  • When [1 Sided → 2 Sided] has been selected, specified pages will always be copied on the front of copies.

x

QR Code