Stamp Text
You can enter text to use as a stamp.
You cannot use the bypass tray with this function.
Press [Edit / Color].
Press [Stamp] twice.
Press [Stamp Text].
Press [Change Text].
Enter stamp text, and then press [OK].
Press [Change].
Select the stamp position, and then press [OK].
Press [All Pages] or [1st Page Only] to select the print page.
Press [Stamp Color].
Select the stamp color, and then press [OK].
Press [OK] three times.
You can enter up to 64 characters.
When Auto Clear is done, [Reset] is pressed, or the power is turned off, the text is cleared. To save the typed text, you can register them in a program.
Depending on the stamp position, parts of the text might not be copied.
For details about stamp positions, see Stamps.
For details about how to enter text, see How to Enter Text.
You can change the settings for Stamp Text under [Stamp Text] in Settings. For details, see User Guide of your device.
Before using this function, select [On] under [Change Job Serial No. for First Job] in Settings. For details about [Change Job Serial No. for First Job], see User Guide of your device.
You cannot use the bypass tray with this function.
Press [Edit / Color].
Press [Stamp] twice.
Press [Stamp Text].
Press [Change Text].
Enter stamp text, and then press [OK].
Stamps may consist of up to 55 alphanumeric characters and symbols, and a numeric series of up to 9 digits for a total of 64 characters.Press [Change Start No.].
Enter a number from which to start numbering, and then press [
].
The number is displayed in nine digits. If you enter "1", the number is printed as "000000001".Press [OK].
Press [Change].
Select the stamp position, and then press [OK].
Press [Stamp Color].
Select the stamp color, and then press [OK].
Press [OK] three times.
Stamps may consist of up to 55 alphanumeric characters and symbols, and a numeric series of up to 9 digits for a total of 64 characters.
The number is displayed in nine digits. If you enter "1", the number is printed as "000000001"
When Auto Clear is done, [Reset] is pressed, or the power is turned off, the text is cleared and the next number in the sequence is displayed.
This function cannot be used for the Job Preset or Interrupt Copy function. Also, this function cannot be used to print stored documents.
If this function is used with the Combine function, a print image may differ according to the [Page Numbering in Combine] settings under [Page Numbering]. For details, see Page Numbering.
For details about Stamp Text, see Stamp Text.