Color Balance

Adjusts the overall color tone when the copy is reddish or bluish.

Illustration of Color Balance

Color balance program

You can store the color balance setting as a color balance program and recall it when you want to use it. For details, see Registering the adjusted color balance.

  1. Press [Edit / Color].
    Operation panel screen illustration

  2. Press [Color].

  3. Press [Adjust Color].

  4. Adjust the color balance by pressing [Lighter] or [Darker].
    Operation panel screen illustration

  5. Press [OK] twice.

Note

  • When Auto Clear is done, [Reset] is pressed, or the power is turned off, the adjusted settings will be deleted and the values will be reset.

Registering the adjusted color balance

Register adjusted color balance settings so that you can use them later.

You can store up to three programs.

  1. Press [Edit / Color].

  2. Press [Color].

  3. Press [Adjust Color].

  4. Adjust the color balance.

  5. Press [Program Color Balance].

  6. Press [Program].

  7. Select a program number.

  8. Press [OK] twice.

Note

  • If you want to change the registered settings, register them one more time. In this case, the previously registered settings will be overwritten.

  • If you select the program number key where is displayed, the previously registered settings will be overwritten.

  • For details about how to adjust the color balance, see Color Balance.

Section Top

Changing the color balance

Changes the settings stored in color balance programs.

  1. Press [Edit / Color].

  2. Press [Color].

  3. Press [Adjust Color].

  4. Press [Program Color Balance].

  5. Select the program number to be changed.

  6. Change the registered settings.

  7. Press [Program Color Balance].

  8. Press [Program], and then press the program number to be overwritten.

  9. Press [Yes].

  10. Press [OK] twice.

Section Top

Recalling the color balance

Applies settings registered in color balance programs to the copy job.

  1. Press [Edit / Color].

  2. Press [Color].

  3. Press [Adjust Color].

  4. Press [Program Color Balance].

  5. Select the program number you want to use.

  6. Press [OK] twice.

Note

  • When Auto Clear is done, [Reset] is pressed, or the power is turned off, the adjusted settings will be deleted and the initial values will be reset.

Section Top

Deleting the color balance

Deletes the settings stored in color balance programs.

  1. Press [Edit / Color].

  2. Press [Color].

  3. Press [Adjust Color].

  4. Press [Program Color Balance].

  5. Press [Delete], and then select the program number you want to delete.

  6. Press [Yes].

  7. Press [OK] twice.

Section Top

x

QR Code