Auto Paper Select

If the machine you are using can detect the size of original automatically, it selects a suitable size of copy paper automatically based on the detected original size and the reproduction ratio you select.

For details about original sizes and orientations that can be used with Auto Paper Select, see User Guide of your device.

  1. Make sure that [Auto Paper Select] is selected.
    Operation panel screen illustration

  2. Place the originals, and then press [Start].

Note

  • In Auto Paper Select mode, the machine selects a paper tray automatically only when the tray is set as shown below. For details, see User Guide of your device.

    • Settings screen type: Standard

      • [Paper Type] [Plain Paper] or [Recycled Paper]
      • Select [Apply Auto Paper Select/Auto Tray Select]

    • Settings screen type: Classic

      • [Paper Type] [Do not Display] or [Recycled Paper]
      • [Apply Auto Paper Select] [On]

  • Trays with a lock mark (Operation panel screen illustration) will not be automatically selected.

Rotate Copy

If the orientation in which your original is placed is different from that of the paper you are copying onto, the machine rotates the original image by 90 degrees to fit it on the paper. This is called "Rotate Copy".

This function works when [Auto Reduce / Enlarge] is selected. For details, see Auto Reduce / Enlarge.

Illustration of Rotate Copy

Note

  • If you are enlarging A5Portrait or 51/2 × 81/2Portrait originals onto A4Landscape or 81/2 × 11Landscape or larger, place the originals in the Landscape orientation.

Section Top

x

QR Code