Previous
This section describes the user tools in the General Features menu under System Settings.
Program / Change / Delete User Text
You can register text phrases you often use when specifying settings, such as ".com" and "Regards".
You can register up to 40 entries.
Program / Change
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [User Tools] (
) icon.Press [Machine Features].
Press [System Settings].
Check that [General Features] is selected.
Press [Program / Change / Delete User Text].
Check that [Program / Change] is selected.
Select the user text you want to change.
To program a new user text, press [*Not Programmed].
Enter the user text, and then press [OK].
Enter the user text up to 80 characters.
Press [Exit].
Press [User Tools] (
) on the top right of the screen.Press [Home] (
) at the bottom of the screen in the center.
Delete
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [User Tools] (
) icon.Press [Machine Features].
Press [System Settings].
Check that [General Features] is selected.
Press [Program / Change / Delete User Text].
Press [Delete].
Select the user text you want to delete.
Press [Yes].
Press [Exit].
Press [User Tools] (
) on the top right of the screen.Press [Home] (
) at the bottom of the screen in the center.
Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or the number of copies yet to be made (count down).
Default: [Up]
Screen Color Setting
You can change the screen color.
Default: [Blue-gray]
This setting is applied to the classic application screens.
Interleave Priority
Interleave Priority is given to the mode selected.
Default: [Display Mode]
Function Reset Timer
You can set the length of time the machine waits before changing modes when using the multi-access function.
This is useful if you make many copies and have to change settings for each copy. If you set a longer reset period, you can prevent interruption from other functions.
Default: [Set Time], [3 second(s)]
When you select [Set Time], enter the time (3-30 seconds, in steps of 1 second) using the number keys.
The Function Reset Timer setting is ignored if [Switch Every Specified No.] or [Job Order] is set for Interleave Priority.
Output: Copier (copier)
Specify a tray to which documents are delivered.
Default: [Internal Tray 1]
Output: Document Server (Document Server)
Specify a tray to which documents are delivered.
Default: [Internal Tray 1]
Output: Fax (facsimile)
Specify a tray to which documents are delivered.
Default: [Internal Tray 1]
Output: Printer (printer)
Specify a tray to which documents are delivered.
Default: [Internal Tray 1]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.
Default: [Normal]
The key repeat function is available only on the classic application screens.
System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
Default: [On], [15 second(s)]
When the setting is [On], you can specify a display time between 10 and 999 seconds in steps of 1 second using the number keys.
External Keyboard
You can specify the layout for an external keyboard which is connected to the USB Host Interface port.
Default: [Off]
The following languages can be set:
(mainly Europe)
[English], [German], [Standard French], [Belgian French], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], [Turkish], and [Greek]
(mainly North America)
[English], [German], [Canadian French], [Italian], [Spanish], [Dutch], [Portuguese], [Polish], [Czech], [Swedish], [Finnish], [Hungarian], [Norwegian], [Danish], [Japanese], [Simplified Chinese], [Traditional Chinese], [Russian], [Hangul], [Catalan], and [Turkish]
Compatible ID
You can enable or disable the Compatible ID setting.
If this setting is set to [Active], you can install the printer driver automatically by connecting a computer to the machine via USB or network.
Default: [Active]
Program/Change USB Device List
You can register "Product ID" and "Vendor ID" information for a USB keyboard or IC card reader device to the device list to limit the usage of USB devices. The "Product ID" and "Vendor ID" information for a USB device have been assigned by the manufacturer to identify the individual device. "Product ID" input settings are between 0 and 0xFFFF. "Vendor ID" input settings are between 0x0001 and 0xFFFE. Up to ten pairs of "Product ID" and "Vendor ID" information can be registered.
Human Detection Sensor
Specify whether or not the machine detects a person approaching it. If [Active] is selected and the machine detects a person approaching it while Energy Saver mode is enabled, it enters standby mode automatically and can reduce the time to recover to a normal state.
Default: [Active]
Output Priority When Paper is Fed to Finisher
You can choose whether to give priority to the time to recover from Energy Saver mode or to the print speed when you feed paper to the finisher. If [Print Start Time] is selected, the number of pages printed is less than in the normal state shortly after recovering from Energy Saver mode. However, the time to start printing is reduced.
Default: [Print Start Time]
Energy Saving Recvry. for Business Applicatn.
Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the machine, such as Address Book Management or Browser.
Default: [Off]
If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.
For details on how to access System Settings, see Accessing User Tools.
