The leading edge of Paper Weight 1 or Paper Weight 2 is rolled
In the 03: [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Operators] menu, select 0301: [Correct Output Paper Curl: 1 Sided: Face Up], 0302: [Correct Output Paper Curl: 1 Sided: Face Down], or 0303: [Correct Output Paper Curl: 2 Sided], and then adjust the degree of decurling.
<Single-sided printing: Printed side face down>
To correct curls facing up, specify "П Curl Correction Level".
To correct curls facing down, specify "U Curl Correction Level".
<Single-sided printing: Printed side face up/Duplex printing>
To correct curls facing up, specify "U Curl Correction Level".
To correct curls facing down, specify "П Curl Correction Level".
Select "Large", "Medium" or "Small" depending on the degree of decurling required.
Print the image. Is the problem resolved?
Yes | Finished! |
No | Contact your service representative. |
The leading edge of Paper Weight 0 is rolled
Attach the SR5000 series output tray for banner sheet.
Print the image. Is the problem resolved?
Yes | Finished! |
No | Go to the next step. |
In the [Main Unit: Paper Feed/ Output] group on the [Adjustment Settings for Operators] menu, set 0310: [Correct Output Paper Curl] to "U Curl Correction Level".
Select "Large" or "Small" depending on the degree of decurling required.
Print the image. Is the problem resolved?
Yes | Finished! |
No | Contact your service representative. |