1302 [2-Tray LCIT: Fan/Shutter] [Vacuum Fan Level]
Function
Adjusts the amount of air sucked against the paper feed belt.
* If non-feeds occur due to low air suction power, increase the power.
When to use
If double-feeds do not improve by setting 1301: [2-Tray LCIT: Paper Feed Mode] to [Prevent Double Feed (Weakest Blow)], increase the airflow in steps of 10%.
If double-feeds occur when printing on non-woven-fabric paper or other high-porosity paper, the problem may be solved by decreasing the air flow in steps of 10%.
Related Troubleshooting
None