1302 [2-Tray LCIT: Fan/Shutter] [Side Fan Level]
Function
Adjusts the amount of air blown from the side fans to separate the sheets.
When to use
If double-feeds do not improve by setting 1301: [2-Tray LCIT: Paper Feed Mode] to [Prevent Double Feed (Weakest Blow)], decrease the airflow in [Updraft Fan Level] in steps of 10%.
Face curl |
Back curl |
---|---|
Sheets do not separate well because air does not flow in between the sheets. Also, the sheets tend to float up and result in double-feeds. |
Sheets do not separate well because air does not flow in between the sheets. Also, the sheets tend to get pressed down and result in non-feeds. |
Related Troubleshooting
Banding: 63mm (2.4inches) Intervals
Worm Holes: Text or Edge of an Image
Worm Holes: When Using the Clear Toner
For detailed procedure, see the Troubleshooting manual.