Skip header
 

Folding positions

Select the fold position in the printer driver.

Important

  • The paper types that can be used for fold function are as follows:

  • Plain, Recycled, Color, Preprinted, Prepunched, Black, Coated: High Gloss, Coated (Glossy), Coated (Matte), Textured

The finished form may vary depending on the paper size. The following table shows the examples of A3Landscape size paper folded in each fold type. For details, see the printer driver Help.

Print Data Direction

Fold Types

Folding Position

Print Inside

Print Outside

Not Specified

Illustration of folding position

Portrait

Z-fold

-

-

Illustration of folding position

Half Fold

Illustration of folding position

Illustration of folding position

-

Letter Fold-in

Illustration of folding position

Illustration of folding position

-

Letter Fold-out

-

-

Illustration of folding position

Double Parallel

Illustration of folding position

Illustration of folding position

-

Gate Fold

Illustration of folding position

Illustration of folding position

-

Illustration of folding position

Landscape

Z-fold

-

-

Illustration of folding position

Half Fold

Illustration of folding position

Illustration of folding position

-

Letter Fold-in

Illustration of folding position

Illustration of folding position

-

Letter Fold-out

-

-

Illustration of folding position

Double Parallel

Illustration of folding position

Illustration of folding position

-

Gate Fold

Illustration of folding position

Illustration of folding position

-

Note

  • For details about which paper sizes are compatible with which fold or Multi-sheet Fold, see "Specifications for Multi-Folding Unit", Specifications.

  • If you apply the Multi-sheet Fold function with letter fold-in to B5 JIS size paper, the folded sheets will be different in size to sheets folded without the Multi-sheet Fold function.

    Illustration of multi-sheet fold

    1. Multi-sheet Fold not applied

    2. Multi-sheet Fold applied

  • When printing a large number of copies with the Z-fold function, it is recommended to attach the Z-fold support tray to the finisher. For details on attaching the Z-fold support tray to the finisher, see When using the Z-fold function or When using the Letter Fold-out function.

PreviousNext