Skip header
 

Checking the Earth Leakage Breakers

WARNING

  • When this machine's circuit breaker is set to "Off", do not switch it to "On". Doing so could result in electric shock, fire, smoke, or tripping of the room's breakers.

Important

  • If the earth leakage breaker is not functioning normally, contact your sales or service representative.

An earth leakage breaker is installed on this machine, trimmer, ring binder, and perfect binder.

Once a year, check that the earth leakage breaker functions properly. Normally, the breaker is in the On position.

The following procedure is explained using illustrations of the main unit and trimmer as an example.

1Turn off the main power.

Make sure that the main power indicator goes out.

2Open the front left cover, and then turn off the AC power switch.

3Using a ballpoint pen or similar pointed object, press in the earth leakage breaker's test button.

Main unit

Earth leakage breaker illustration

Trimmer

Earth leakage breaker illustration

4Check that the earth leakage breaker moves to the Off position.

Main unit

Earth leakage breaker illustration

Trimmer

Earth leakage breaker illustration

5Return the earth leakage breaker to the On position.

Main unit

Earth leakage breaker illustration

Trimmer

Earth leakage breaker illustration

6Turn on the AC power switch, and then close the front left cover.

7Push the main power switch to turn on the main power.

Note

  • If the machine does not start up when you turn its main power switch back on, check whether the earth leakage breaker is in the Off position. If the breaker is in the Off position, contact your sales or service representative. Do not reset the earth leakage breaker yourself.

PreviousNext