Skip header
 

Procedure for removing jammed paper

1Remove the jammed paper by following the procedures that are displayed on the control panel.
When [Previous] or [Next] is displayed, press [Next] after completing a procedure.

Operation panel screen illustration

2When the jammed paper is removed, restore the machine to the original state.

Note

  • If "D" is displayed and you cannot remove the misfed paper from the right side of the fusing unit, use the knob located on the inside of the left front cover.

    1. Pull out the knob located on the inside of the left front cover.

      Machine illustration

    2. Align the knob with the slot on the fusing unit, and then insert it.

      Machine illustration

    3. Turn the knob counterclockwise until the misfed paper comes out from the right side of the fusing unit, and then remove it.

      Machine illustration

    4. Return the knob to its original position.

PreviousNext