Skip header
 

This section explains settings for dividing multiple originals by a specified number of pages and then sending them.

1Press [Original Feed Type].

Operation panel screen illustration

2Press [Divide].

3Press [Change], and then use the number keys to enter the number of pages you want to divide the job into sets of.

4Press the [Sharp] key.

5If necessary, press [Division Check].

When you select [Division Check], if the originals were not scanned in order due to a paper jam or multi-sheet feed, a screen for stopping or continuing scanning appears at the end of the scan.

6Press [OK] twice.

Note

  • You can select [Divide] and [Mix 1 & 2 Sided] at the same time. However, the function selected last has priority.

  • If the last page of a batch of divided two-sided originals is blank, you can skip that page. To skip scanning, in [Last Page] under [2 Sided Original], select [1 Side]. To scan the last page as a blank page, select [2 Sides]. For details, see "Two-sided original", Original Settings.