Skip header
 

Configuring classification codes

Use Web Image Monitor to specify whether or not to apply classification code requirement to print jobs.

Important

  • If [Required] is selected for the classification code requirement setting in Web Image Monitor, any print job that without a classification code specified will not be printed.

  • The configuration page can be printed at any time.

  • The default setting for classification code requirement is [Optional].

1Log in to Web Image Monitor in administrator mode.

About logging in, see Device Management for details.

2Click [Configuration] on the [Device Management] menu.

3Under "Device Settings", click [Logs].

4Check that [Required] or [Optional] is selected for "Classification Code" in the "Common Settings for All Logs" column.

5Click [OK].

6Click [Logout].

7Quit Web Image Monitor.