General Settings

Select the title to be shown on the destination list.

Default: [Title 1]

If the machine receives a TWAIN scanning request while it is writing data to memory or performing e-mail or Scan to Folder scanning jobs, it switches to the TWAIN scanner function either immediately or after a specified standby time elapses following the last key operation.

Use this setting to specify whether the machine switches to TWAIN immediately or waits until the standby time elapses when it receives a TWAIN scanning request.

Default: [On]

• On

  The machine will switch to the TWAIN scanner function when the time specified here elapses following the last key operation. You can specify standby time (3-30 seconds).

• Off

  The machine will switch to the TWAIN scanner function immediately.

In the machine's address book, select which address book appears by default.

You can select either [Email Address] or [Folder].

Default: [Email Address]

Up to 100 transmission results can be checked on this machine. If the stored transmission results reach 100, specify whether to print the delivery journal.

• Print and Delete All

  The transmission journal is printed automatically. The printed journal is deleted.

• Do not Print: Delete Oldest

  Transmission results are deleted one by one as new results are stored.

• Do not Print: Disable Send

  Transmission cannot be performed when the journal is full.

  When printed, all records are deleted after printing. When not printed, records over the limit are automatically deleted in succession from the oldest record.

  While the journal is being printed, files with the status waiting cannot be sent.

Default: [Print and Delete All]

The scanner journal is printed and deleted.

The scanner journal is deleted without being printed.