Data Management

You can prevent unauthenticated users from changing the user tools. Menu Protect can be specified for each of the following user tools menus.

For details, see "Specifying Menu Protect", Security Guide.

When [On] is set, you can lock the [List / Test Print] items.

You can perform image density adjustment and color calibration for the following resolutions:

600 × 600 dpi (1 bit), 600 × 600 dpi (2 bit), 600 × 600 dpi (4 bit), and 1200 × 1200 dpi (1 bit).

Default: [Photo Priority]

• Text Priority

  Use the optimum CMYK toner combination for text printing.

• Photo Priority

  Use the optimum CMYK toner combination for photo printing.

You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing.

• Adjust Auto Density

  You can print the gradation of auto density.

• Print Test Pattern 1 for Calibration

  You can print gradation correction sheet 1.

• Print Test Pattern 2 for Calibration

  You can print gradation correction sheet 2.

• Reset Setting

  You can reset the gradation correction value to default.

If the machine is replaced with another manufacturer's machine, use the previous machine's tray parameters. You can register up to three tray parameters. You cannot specify the same tray parameter for different paper trays.

• Tray Parameters (PCL)

  You can configure settings to change paper tray parameters used for PCL printing. You can specify the settings for the installed trays and the Auto Tray Select function.

• Tray Parameters (PS)

  You can configure settings to change paper tray parameters used for PostScript printing. You can specify the settings for the installed trays only.