Previous
This section describes the user tools in the General Features menu under System Settings.
Screen Color Setting
You can change the screen color.
Default: [Blue-gray]
Displayed Application Switchover Timer
Specify when to switch the screen if an event occurs in a different application because there have been no key inputs for a certain period of time in the application screen.
Default: [Set Time], [3 second(s)]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.
Default: [Normal]
Measurement Unit
You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.
(mainly Europe and Asia)
Default: [mm]
(mainly North America)
Default: [inch]
Check Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
Default: [On], [15 second(s)]
When the setting is [On], you can specify a display time between 10 and 999 seconds in steps of 1 second using the number keys.
Energy Saving Recvry. for Business Applicatn.
Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the machine, such as Address Book Management or Browser.
Default: [Off]
If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.
Original Feed Delay 2
Specify the start time for scanning original data.
Default: [1 second(s)]
Feed Start Method
Specify whether feeding starts automatically or after you press the [Start] Key.
Default: [Auto]
ID Card Feeder Instruction Screen
Specify whether to display the caution screen of the ID card feeder.
Default: [Display]
For details on how to access System Settings, see Accessing User Tools.
