Skip header
 

Precautions for Loading Paper

CAUTION

  • When loading paper, take care not to trap or injure your fingers.

  • If one or more paper feed trays are installed, do not pull out more than one tray at a time when you are changing or replenishing paper or resolving paper jams. Pressing down forcefully on the machine's upper surfaces can result in malfunctions and/or user injury.

Important

  • Do not stack paper over the limit mark.

  • Do not change the size of the paper for the specified printing tray while documents are being scanned or printed.

Note

  • To prevent multiple sheets from being fed at once, fan the paper before loading it.

  • If you load paper when only a few sheets of paper remain in the tray, multiple sheet feeding may occur. Remove any remaining paper, stack them with the new sheets of paper, and then fan the entire stack before loading it into the tray.

  • Straighten curled or warped paper before loading.

  • For details about the paper sizes and types that can be used, see Supported Paper Sizes and Types.

  • You might at times hear a rustling noise from paper moving through the machine. This noise does not indicate a malfunction.

PreviousNext