Initial Settings

User Parameters allow you to customize various settings to suit your needs.

For details about Parameter Setting, see Parameter Settings.

Use this function to select a line type when the machine is connected to a G3 analog line.

Dial and Push lines are available for selection.

This function is not available in some regions.

Default: [Push Button Phone]

1. Press [Fax Features].

2. Press [Initial Settings].

3. Press [Select Dial/Push Phone].

4. Press [Push Button Phone] or [Dial Phone (10PPS)] to select the line, and then press [OK].

5. Press [Exit].

Program information to be shown on the display of the other machine and printed as a report. The following information can be programmed.

• Fax Header

• Own Fax Number

For details about how to program Fax Information, see Registering Fax Information.

You can prevent unauthenticated users from changing the user tools settings.

For details about Menu Protect, see "Specifying Menu Protect", Security Guide.

Select the country/region in which the machine is used. The country/region you specify determines the time and date display format and the default values of the fax transmission-related settings.

Make sure to select the country/region correctly.

Selecting a wrong country/region may cause failures in fax transmissions.

The default value for this setting is the country/region you have specified using the Installation Settings Wizard, which is required after turning on the machine for the first time.

You cannot change the country/region during transmission or when received documents are stored on the machine.