Previous
This mode can be used to select a reproduction ratio automatically and copy two originals onto a single sheet of copy paper.
The machine selects a reproduction ratio between 25 and 400%. If the orientation of the original is different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to make copies properly.
Orientation of the original and image position of Combine
The image position of Combine differs according to original orientation and the number of originals to be combined.
Portrait (
) originals
Landscape (
) originals
Placing originals (originals placed in the ADF)
The copy order in the Combine function is "from left to right". To copy originals from right to left in the ADF, place them upside down.
Originals read from left to right
Originals read from right to left
If the calculated reproduction ratio falls below the minimum reproduction ratio, the calculated reproduction ratio will be adjusted to the minimum ratio. If this happens, with some ratios, parts of the image might not be copied.
If the number of originals placed is less than the number specified for combining, the last page is left blank as shown.
