Log in as the administrator from Web Image Monitor.
Point to [Device Management], and then click [Configuration].
Click [Import/Export Device Setting Information] under “Device Settings”.
Select [Include] or [Exclude] in “Device Unique Information”.
Device unique information includes the IP address, host name, etc.
Click [Change] in "Encryption Key".
Enter [Encryption Key].
Re-enter the Encryption Key in “Confirm Encryption Key”, and then click [OK].
Click [Run Export].
Click [OK].
Log out.
If import or export fails, you can check the log for the error. The log is stored in the same location as the exported device setting information file.