Previous
When you use paper other than the standard types, specks of paper may stick on the registration roller, causing problems. Clean the registration roller if white dots appear on prints.
Clean the registration roller if printed paper becomes smeared after a paper jam is cleared.
|
Do not use chemical cleaners or organic solvents such as thinners or benzine.
Turn off the printer and unplug the power cord.
Pull out the plug from the socket. Remove all the cables from the printer.
Pull the front cover open lever, and then open the front cover with both hands carefully.
The registration roller is set in the position shown by the illustration.
Do not touch the registration roller.
Using a cloth, wipe the rubber registration roller.
Close the front cover with both hands carefully.
Firmly insert the plug of the power cord into the wall socket. Connect all the interface cables that were removed.
Turn on the main power switch.
