When an error occurs, the printer cancels the print job with the error and the jobs received before the error occurs.
This function is effective for print jobs using the following printer languages: PCL, PostScript 3, and PDF.
This function is not effective when:
Printing using RC Gate
Printing using a protocol that cannot detect the end of job, such as via USB connection
Errors may occur when a print job is performed from a USB flash memory device or while a stored document or a list is printed
Press the [Menu] key, and then select the setting items using the [] or [] key.
Select [System] Press [OK]
Select [AutoCncl for Prt Job onErr] Press [OK]
Select [On] Press [OK]
For details about the items that can be configured, see System.