Print Error Report
You can specify whether or not to print an error report when a printer error or memory error occurs.
Default: [Off]
Auto Continue
You can specify whether or not to continue printing after a system error occurs. When you enable this setting, specify how long the error message is displayed before printing is resumed.
When Auto Continue is enabled and a certain printer error occurs in the printer while printing, the job might be cancelled or printing will not be performed as intended. When a job is canceled due to an error, the printer automatically begins the next job in the queue.
Default: [Off]
Memory Overflow
You can specify whether or not to print a memory overflow error report.
Default: [Do not Print]
AutoCncl for Prt Job onErr
You can specify whether or not to automatically cancel a print job if an error occurs and jobs that have been received before the error occurs.
Default: [Off]
Printer Language
You can specify the printer language.
Default: [Auto]
Sub Paper Size
You can specify whether or not the paper size switches automatically when paper of the specified size is not loaded in the tray.
This feature supports automatic switching between [A4 and Letter (8 1/2" × 11")] size paper only.
Paper switching may crop page edges and other undesirable print results. This is due to the difference between [A4 and Letter (8 1/2" × 11")] in the maximum printable area.
Default: [Auto]
Default Printer Lang.
You can select the printer language to be used when the printer fails to detect the printer language.
Default: [PCL]
Sleep Mode Timer
Sleep Mode Timer On/Off
You can specify whether or not the printer enters Sleep mode.
Default: [On]
Sleep Mode Timer
You can specify the duration the printer waits before entering Sleep mode. The printer enters Sleep mode if no user input has been made during the specified duration. When the printer is in Sleep mode, it takes longer to start printing.
Default: [1 minute]
Fusg Off Mode(EnSav)On/Off
Fusg Off Mode(EnSav)On/Off
You can specify whether or not to use Fusing Unit Off mode.
Default: [Off]
On
Turns on Fusing Unit Off mode. This setting further reduces power consumption, but the printer may take longer to recover from Fusing Unit Off mode.
When you select [On], you can set [Exit Fusing Unit Off Mode] and [Fusing Unit Off Mode Timer].
Off
Turns off Fusing Unit Off mode.
Exit Fusing Unit Off Mode
You can specify the condition for the printer to exit Fusing Unit Off mode.
Default: [On Printing]
On Printing
The printer exits Fusing Unit Off mode when printing is performed.
On Operating Control Panel
The printer exits Fusing Unit Off mode when any key on the control panel is pressed.
Fusing Unit Off Mode Timer
You can specify the period of time the printer waits before entering Fusing Unit Off mode.
The timer is reset if any key on the control panel is pressed or printing is performed.
Default: [10 seconds]
The Fusing Unit Off Mode Timer is reset when:
A print is performed
A cover is opened when [Exit Fusing Unit Off Mode] is set to [On Printing]
Any key on the operating panel is pressed when [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel]
Ready State After Printing
You can specify the state the printer return to after printing documents during Sleep Mode.
Default: [Cntrl Panel Off (EngySavg)]
Control Panel On
The printer does not return to Sleep Mode and the initial screen appears on the control panel.
Cntrl Panel Off (EngySavg)
The printer returns to Sleep Mode.
B&W Print Priority
You can specify whether or not to reduce the consumption of color toner. When this function is enabled, it may take longer to start printing a color page.
Default: [Off]
Print Compressed Data(IPP)
You can specify whether or not to print compressed data. The supported compression format is GZIP.
Default: [Off]
B&W Page Detect
You can specify whether to recognize black-and-white images by page or by document. The black-and-white recognition function allows the printer to print monochrome images in monochrome mode even if color printing is specified.
Default: [Per Job]
Main Pwr Off if Ntwrk Disc (mainly Europe)
You can specify whether or not to turn off the power automatically when neither the wired LAN nor wireless LAN is connected.
Serial No. of Machine
You can check the serial number of the printer.