Configuring a Wireless LAN Using Easy Setup (When Using a Wireless Access Point Supporting WPS)
Previous
If the wireless access point in use supports WPS, the wireless LAN connection settings and security settings can be automatically configured in Infrastructure mode.
Press the [Menu] key, and then select the setting items using the [
] or [
] key.
Select [Host Interface] 
Press [OK]
Select [Wireless LAN] Press [OK]
Select [WLAN: EasySetup/Direct Con] Press [OK]
Select [Push Button Method] or [PIN Code Method] Press [OK]
If you select Push Button Method, press the WPS button on the wireless LAN access point.
If you select PIN Code Method, enter the displayed PIN code in the Registrar.
Press [Start]
When Wireless LAN Easy Setup is complete, press [OK].
