Previous
With an optional finisher installed, this machine can staple individual sets when printing multiple sets.
If the PCL 6 printer driver is used, Staple can be specified in the "Staple:" list on the [Frequently Used Settings] tab or in the [Finishing] menu on the [Detailed Settings] tab. If the PCL 5c printer driver is used, it can be specified in the [Setup] tab. For printing methods, see the printer driver Help.
For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Getting Started.
When bidirectional communication is disabled, configure option settings for the machine using the printer driver. If options are not set correctly in the printer driver, you cannot make staple settings even if a finisher with the staple function is installed. For details, see "Configuring Option Settings for the Printer", Driver Installation Guide.
Be sure to set the paper size and paper orientation in the printer driver when using this function.
For the paper size and number of sheets that can be stapled, see "Specifications", Maintenance and Specifications.
The specified staple position varies depending on paper feed and print data orientation.
