Skip header
 

Staple Position

The specified staple position varies depending on paper feed and print data orientation. The following table show the staple positions:

Finisher

Paper Orientation on the Machine

Print Data Direction

Staple Position

Internal Finisher SR3130/Finisher SR3210 (with staple)

Finisher SR3230

Internal Finisher SR3180/Finisher SR3210 (stapleless)

Illustration of paper orientation

Portrait

Illustration of staple position

Illustration of staple position

Illustration of staple position

Landscape

Illustration of staple position

Illustration of staple position

Illustration of staple position

Illustration of paper orientation

Portrait

Illustration of staple position

Illustration of staple position

Illustration of staple position

Landscape

Illustration of staple position

Illustration of staple position

Illustration of staple position

Booklet Finisher

Paper Orientation on the Machine

Print Data Direction

Staple Position

Booklet Finisher SR3220

Booklet Finisher SR3240

Illustration of paper orientation

Portrait

Illustration of staple position

Illustration of staple position

Landscape

Illustration of staple position

Illustration of staple position

Illustration of paper orientation

Portrait

Illustration of staple position

Illustration of staple position

Landscape

Illustration of staple position

Illustration of staple position

Note

  • The optional finishers you can attach to the machine vary, depending on the machine type you are using. For details about the options that can be attached, see "Guide to Functions of the Machine's External Options", Getting Started.

  • Stapling might not be in the specified position if combine and two-sided printing are both selected. After setting the staple position, use the printer driver's preview icon to check the position before printing.

PreviousNext