Adjust the image position.
<If custom paper is used>
In [Advanced Settings] for the custom paper in use, adjust the image position.
Side 1
To adjust the position horizontally, change the value in [Adj Image Position of Side1 With Feed].
To adjust the position vertically, change the value in [Adj Image Position of Side1 Across Feed].
Side 2
To adjust the position horizontally, change the value in [Adj Image Position of Side2 With Feed].
To adjust the position vertically, change the value in [Adj Image Position of Side2 Across Feed].
<If custom paper is not used>
In the [Machine: Image Position] group on the [Adjustment Settings for Skilled Operators] menu, adjust the image position.
To adjust the position horizontally, change the value in [Adjust Image Position With Feed Direction].
To adjust the position vertically, change the value in [Adjust Image Position Across Feed Direction].
If the problem persists even though you have adjusted the setting to its maximum and minimum values, contact your service representative.
For details about specifying settings in the [Adjustment Settings for Skilled Operators] menu and [Advanced Settings] menu, see Adjustment Item Menu Guide.