Previous
Depending on the cause of the problem, follow the procedure below:
An envelope is used.
If an envelope flap at the trailing edge is oblique, a skew may be wrongly detected when the envelope is transferred with its flap open.
Disable skew detection function.
<If custom paper is used>
In [Advanced Settings] for the custom paper in use, set [Skew Detection] to [Off].
<If custom paper is not used>
In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators] menu, set [Skew Detection] to [Off].
Disabling the skew detection function will allow skewed printing. If this is not acceptable, contact your service representative.
