Adjust how much the registration roller rotates in reverse for Z-fold skew correction.
Use this if the Z-fold skew correction causes problems.
With the initial factory setting of "0.0", the reverse rotation is set to 3 mm. Press [-] to reduce the reverse rotation. With "-3.0", the reverse rotation is reduced to 0 mm.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
[Correct Z-fold Skew (Reverse)] |
0.0 |
0.0 |
-3.0 |
0.5 |
mm |