Previous
Adjust the length of sheets moved for Z-fold skew correction.
Use this if the Z-fold skew correction causes problems.
With the factory default setting of "0.0", the length of the sheets moved is set to 9 mm. Press [－] to reduce the length. With "-9.0", the length of sheets moved for Z-fold skew correction is reduced to "0".
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
[Correct Z-fold Skew] |
0.0 |
0.0 |
-9.0 |
0.5 |
mm |
