Previous
If the indicator lamp for [Check Status] lights up or flashes, press [Check Status] to display the [Check Status] screen. Check the status of each function in the [Check Status] screen.
[Check Status] screen
[Mach./Applic. Stat] tab
Indicates the status of the machine and each function.
[Check]
If an error occurs in the machine or a function, press [Check] to view details.
Pressing [Check] displays an error message or the corresponding function screen. Check the error message displayed on the function screen and take the appropriate action. For details about how to resolve the problems described in error messages, see When Messages Appear.
Messages
Displays a message that indicates the status of the machine and each function.
Status icons
The status icons that can be displayed are described below:
: The function is performing a job.
: The machine cannot be used because an error has occurred in the machine.
: The function cannot be used because an error has occurred in the function or machine. This icon may also appear if the toner is running low.
The following table explains problems that cause the indicator lamp for [Check Status] to light or flash.
Problem |
Cause |
Solution |
|---|---|---|
Documents and reports do not print out. |
The paper output tray is full. |
Remove the prints from the tray. |
Documents and reports do not print out. |
There is no paper left. |
Load paper. For details about loading paper, see "Loading Paper", Paper Specifications and Adding Paper. |
An error has occurred. |
A function which has the status “Error Occurred” in the [Check Status] screen is defective. |
Press [Check] in the function which the error has occurred. Then read the displayed message, and take the appropriate action. For details about error messages and their solutions, see When Messages Appear. You can use other functions normally. |
The machine is unable to connect to the network. |
A network error has occurred. |
|
