Skip header
 

Guide to ComponentsRegion B icon(mainly North America)

CAUTION


  • Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Front and left view

Main unit illustration numbered callout illustration

  1. ADF

    Lower the ADF over originals placed on the exposure glass.

    If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

  2. Exposure glass

    Place originals face down here. For details, see Placing Originals on the Exposure Glass Region B icon(mainly North America).

  3. Vents

    Prevent overheating.

  4. Control panel

    See Guide to the Names and Functions of the Machine's Control Panel.

  5. Internal tray 1

    Copied/printed paper and fax messages are delivered here.

  6. Front cover

    Open to access the inside of the machine.

  7. Main power switch

    To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and turn the switch on.

  8. Paper trays (Trays 1–2)

    Load paper here. For details, see Loading Paper.

  9. Lower paper trays

    Load paper here. For details, see Loading Paper.

Front and right view

Main unit illustration numbered callout illustration

  1. ADF's extender

    Pull this extender to support large paper.

  2. Bypass tray

    Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper trays. For details, see Loading Paper into the Bypass Tray.

  3. Paper guides

    When loading paper in the bypass tray, align the paper guides flush against the paper.

  4. Extender

    Pull this extender out when loading sheets larger than A4Landscape, 81/2 × 11Landscape in the bypass tray.

  5. Vents

    Prevent overheating.

  6. Lower right cover

    Open this cover when a paper jam occurs.

  7. Right cover

    Open this cover when a paper jam occurs.

Rear and left view

Main unit illustration numbered callout illustration

  1. Vents

    Prevent overheating.

Note

  • The fan inside the machine near the vents may continue running to cool the machine after a large print job. For details, see "When Other Messages Appear", Troubleshooting.

  • Internal tray 1 has paper holders. Copied/printed paper and fax messages are delivered under the paper holders.

  • When using paper holders, always follow the precautions below.

    • Be sure not to place objects in front of the paper holders. Doing so may cause paper jams.

    • After pulling out copied/printed paper, do not put it back under the paper holders. Doing so may result in malfunction and paper jams.