Previous
Paper that has a horizontal length of 148.0–600.0 mm (5.83–23.62 inches) and a vertical length of 90.0–304.8 mm (3.55–12.00 inches) can be fed in from the bypass tray. Note however that the limitation on the horizontal and vertical length range will vary depending on which options are installed.
When prints are delivered to the shift tray of Finisher SR3210 or Booklet Finisher SR3220:
Horizontal length: 148.0–431.8 mm (5.83–17.00 inches), vertical length: 90.0–304.8 mm (3.55–12.00 inches)
When prints are delivered to the shift tray of Finisher SR3230, Booklet Finisher SR3240 or Internal tray 2:
Horizontal length: 148.0–457.2 mm (5.83–18.00 inches), vertical length: 90.0–304.8 mm (3.55–12.00 inches)
When prints are delivered to the folding unit tray using only the Internal Multi-Folding unit:
Horizontal length: 148.0–600.0 mm (5.83–23.62 inches), vertical length: 90.0–297.0 mm (3.55–11.69 inches)
When prints are delivered to other trays:
Horizontal length: 148.0–600.0 mm (5.83–23.62 inches), vertical length: 90.0–304.8 mm (3.55–12.00 inches)
Load the paper face down in the bypass tray.
The bypass tray (
) is automatically selected.
Press [
].
Press [Paper Size].
Press [Custom Size].
Enter the horizontal size with the number keys, and then press [].
Enter the vertical size with the number keys, and then press [].
Press [OK] twice.
Place the originals, and then press [Start].
You can register a custom paper size. For details, see Procedure for registering a custom size (classic). You can also recall the registered custom paper size. For details, see Procedure for recalling the registered custom size (classic).
