Skip header
 

Procedure for Copying from the Bypass Tray (Classic)

1Load the paper face down in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press [Sharp].

3Press [Paper Size].

4Specify the size of the paper, and then press [OK].

5Press [Paper Type].

6Specify the type of the paper as necessary, and then press [OK] twice.

7Place the originals, and then press [Start].

8When the copy job is finished, press [Reset] to clear the settings.

Note

  • If you specify [Display Automatically] for [Paper Settings Screen for Bypass], you can display the [Bypass Tray Paper] screen by pressing [Operation panel screen illustration] instead of pressing [Sharp]. For details, see General Features.

  • If the bypass tray is not automatically selected, press [Operation panel screen illustration].