Previous
Correct the gradation in two areas: bright areas (highlights), and medium areas (midtones). [Print Test Pattern 1 for Calibration] is used to set the correction value for highlights, and [Print Test Pattern 2 for Calibration] is used for mid tones.
Press [Color Calibration] on the [Maintenance: Image] screen.
For details about how to access the [Maintenance: Image] screen, see Accessing User Tools.
Press [
] to switch the screen.
Press [Adjust Auto Density].
Press [OK] to adjust Auto Density.
The confirmation message appears when complete. Press [Exit].
Press [Print Test Pattern 1 for Calibration] or [Print Test Pattern 2 for Calibration] to print the selected sheet.
Select the color you want to adjust.
Press [
] or [
] to adjust the correction value for the selected color, and then press [OK].
Enter the value between 0 and 6.
Press [Print Result] to check the result by printing the calibration sheet.
After printing, press [Yes] to save the settings.
Press [Exit] twice.
Press [Home] (
) at the bottom of the screen in the center.
