Procedure for Staple (classic)

The following type of paper cannot be stapled:

• Translucent paper

• Label paper (adhesive labels)

• Envelopes

• Curled paper

• Paper of low stiffness

When using Booklet Finisher SR4130, you cannot staple coated paper by using Staple: Center.

When using Finisher SR4120 or Finisher SR4110, you cannot staple coated paper.

You cannot change staple positions during copying.

When stapling B4 JIS, 8¹/₂ × 14 or larger paper sizes, be sure to extend the paper support plate of the finisher tray.

Even if you place different size originals in the ADF, appropriate size of copy paper can be automatically selected and stapled using the Mixed Sizes mode and Auto Paper Select function. Load the paper you want to use in the paper trays beforehand.

If the number of the sheets to be stapled as one set exceeds the capacity of the stapler, copies that are not stapled will be delivered to the tray.

To specify Left 2, Top 2, or Slant together with [2 Originals] or [8 Originals] of [Combine 1 Side], or [4 Originals] or [16 Originals] of [Combine 2 Sides]: specify paper for orientation originals and specify paper for orientation originals.

To specify Left 2, Top 2, or Slant together with Double Copies: specify paper for orientation originals and specify paper for orientation originals.

When Left 2 or Top 2 is selected, the following settings are useful to rotate images appropriately:

• Auto Reduce / Enlarge or Auto Paper Select

• Replace [Auto Tray Switching] with [With Image Rotation] in User Tools.

When Top 1 or Bottom 1 is selected and the paper with the same orientation as the original is not loaded, the image is rotated and the paper with the same size and the different orientation is selected. The maximum original image size that can be rotated is A4 or 8¹/₂ × 11.

Depending on the settings for the Staple, you may not be able to use the Rotate Copy function.

When the original image is rotated, the staple orientation changes by 90 degrees.

If you select Staple: Center, you must specify the Magazine function. The machine staples the paper, and folds it like a book, then delivers the paper folded. For details about the Magazine function, see Booklet/Magazine.

When the number of copies exceeds tray capacity, copying stops. If this happens, remove the copies from the finisher tray to resume copying.

For details about the number of sheets that can be stapled together, the sizes, weights, and orientations of paper that can be stapled, and the number of copy sheets that the output tray can accommodate, see the specifications of each option.

You can change the staple positions shown on the initial screen under [Input / Output] in User Tools. For details about staple positions, see Input / Output.