Skip header
 

Removing Jammed Paper

An error message appears if a paper misfeed occurs. The error message indicates where the misfeed occurs.

Check the location and remove the paper.

CAUTION


  • The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface." Otherwise, an injury might occur.


  • Some of this machine's internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.


  • When removing jammed paper, make sure not to trap or injure your fingers.


  • Some of this machine’s components get damaged on contact. Do not touch the sensors, connectors, or other fragile parts that are shown in this manual when removing jammed paper. Otherwise, a malfunction might occur.

Location of Sensors

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Printer illustration

Important

  • To prevent misfeeds, do not leave any torn scraps of paper inside the printer.

  • Contact your service representative if misfeeds occur frequently.

  • If the error message remains displayed even after you remove misfed paper, open and close the front cover.