Top cover
Open this cover to replace the toner or black drum unit/color drum units.
Standard tray
Output is stacked here with the print side down.
Control panel
You can set the display up with your hands. Adjust the angle of it to see clearly.
For details, see Guide to the Names and Functions of the Control Panel.
Front cover
Open this cover when replacing the waste toner bottle, etc., or removing jammed paper.
Pull the right side lever to open the front cover.
Bypass tray
Up to 100 sheets of plain paper can be loaded.
For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.
Main power switch
Use this switch to turn the power on and off.
Perform the shutdown procedure before turning the power off. For details about how to shut down the printer, see Turning Off the Power.
Remaining paper indicator
Indicates the approximate amount of paper remaining in the tray.
Standard paper feed tray (Tray 1)
Up to 500 sheets of plain paper can be loaded.
For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.
Stop fence
Raise the rear fence to prevent A4 or letter-size prints from falling behind the printer.
After using the stop fence, be sure to return it to its original position. The fence may be damaged if it is hit with something or excessive force is applied.
Top cover open lever
Pull this lever upward to open the top cover.
Ventilation holes
Prevent overheating.
Front cover open lever
Pull this lever to open the front cover.
Paper size dial
Use this dial to specify the paper size. To use a paper size that is not indicated on the paper size dial, set the dial to "". If this is the case, set the paper size using the control panel.