You can enable embedded pattern printing to discourage or prevent unauthorized copying.
Log in as the machine administrator from Web Image Monitor.
Point to [Device Management], and then click [Configuration].
Click [Unauthorized Copy Prevention: Printer] under "Device Settings".
Select [On] for "Unauthorized Copy Prevention Setting".
In "Compulsory Unauthorized Copy Prevention", specify whether to select the embedded pattern in the printer driver or on the printer's control panel.
[Driver/Command]
You can specify all embedded pattern settings using the printer driver.
[Driver/Command (Most Settings)]
You can use the printer driver to specify all embedded pattern settings except for the type and density of the embedded pattern.
[Machine Setting(s)]
You cannot specify embedded pattern settings by the printer driver. The embedded pattern specified using the printer's control panel will be printed.
Click [OK].
Log out.
Log in as the machine administrator from the control panel.
Display the “Unauthorized Copy Prevention Stg.” screen.
[System Settings] |
Enable pattern printing.
[On] |
Specify whether to select the embedded pattern in the printer driver or on the printer's control panel.
[Compulsory Unathd. Copy Preventn.] |
[Driver / Command]
You can specify all embedded pattern settings using the printer driver.
[Driver/Command (Most Settings)]
You can use the printer driver to specify all embedded pattern settings except for the type and density of the embedded pattern.
[Machine Setting(s)]
You cannot specify embedded pattern settings by the printer driver. The embedded pattern specified using the printer's control panel will be printed.
Log out.
This can also be specified via Web Image Monitor. For details, see the procedure for SP C340DN.