Previous
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Printer
You can specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Trays 1–2
You can specify the size of the paper loaded in the paper Trays 1–2. To specify a custom paper size, press [Custom Size] and enter the horizontal and vertical dimensions of the paper.
The paper sizes to be set using the control panel.
For details about available paper sizes, see Paper Size Specifications.
Only the installed trays appear on the screen.
Printer Bypass Paper Size
You can specify the size of the paper loaded in the bypass tray. For details about available paper sizes, see Paper Size Specifications.
Default: [81/2 × 11 
]
Paper Type: Bypass Tray
You can specify the type of the paper loaded in the bypass tray. For details about available paper types, see Paper Type Specifications.
Paper Type
Default: [Plain Paper]
Paper Thickness
Default: [Plain Paper 66-90g/m2]
Apply 2 sided
Default: [Yes]
Apply Auto Paper Select
Default: [No]
Paper Type: Trays 1–2
You can specify the type of the paper loaded in the paper Trays 1–2. For details about available paper types, see Paper Type Specifications.
Only the installed trays appear on the screen.
Paper Type
Default: [Plain Paper]
Paper Thickness
Default: [Plain Paper]
Apply 2 sided
Default: [Yes]
Apply Auto Paper Select
Default: [No]
In [Plain Paper Setting] in [Maintenance: Print], you can specify the thickness of the plain paper you load. For details, see Maintenance: Print (SP C342DN).
