Previous
Program/Change/Delete User Text
You can register text phrases you often use when specifying settings, such as ".com" and "Regards". You can register up to 40 entries.
Panel Key Sound
You can specify whether or not the beeper (key tone) sounds when a key is pressed.
Default: [Medium]
Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.
Default: [Home]
Screen Color Setting
You can change the screen color.
Default: [Blue-gray]
Stop Print at Output Limit
Select whether to stop printing when the number of printed sheets reaches the capacity number of the output tray. Stopping will prevent overflow and mixing of sheets on the output tray.
To resume printing, remove the printed sheets from the output tray, and then press [Carry On] on the control panel.
Printing stops when the maximum number is reached, even if the prints have been removed from the output tray during the print run. The maximum number of sheets that can be printed at one time is approximately 150.
If the maximum number of output sheets is reached while printing a particular type of list, printing will be canceled without the machine displaying a message.
Default: [Inactive]
Active
Inactive
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.
Default: [Normal]
Measurement Unit
You can switch the measurement between [mm] and [inch] when you specify a custom size on the control panel.
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
[inch]
Check Status/Job List Display Time
You can specify how long to display the System Status and Job List display for.
When the setting is [On], you can specify a display time between 10 and 999 seconds in 1 second increments using the number keys.
Default: [On], "15" second(s)
Bypass Print:64-84 mm
Select [Active] when printing on paper whose width is less than 84 mm. To print on paper of another size, select [Inactive].
Default: [Inactive]
Active
Inactive
External Keyboard
You can specify the layout of the external keyboard connected to the USB port.
Default: [Off]
Compatible ID
You can enable or disable the Compatible ID setting.
Default: [Active]
