Previous
The table below shows the list of setting items. For details about their functions, see Security Options (SP C340DN).
Extended Security |
Settings by SNMPv1 and v2 |
Prohibit, Do not Prohibit (default) |
Drvr Encrp Key:Encrp Strng |
Simple Encryption (default), DES, AES |
|
@Remote Service |
Prohibit, Do not Prohibit (default) |
|
Password Entry Violation |
|
|
Securty Setg for Accs Viol |
Security Setting On/Off
|
|
Device Access Violation |
Max. Allowed No. of Access 0 to 500 Default: 100 |
|
Measurement Time 10 to 30 Default: 10 |
||
Authentication Delay Time 0 to 9 Default: 3 |
||
Simultns Access Host Limit 50 to 200 Default: 200 |
||
Service Mode Lock |
On, Off (default) |
|
Firmware Version |
System, Web Support, NetworkDocBox, PCL, PDF, Network Support, Font EXP, PS3 Font, PCL Font, PS3, RPCS, Printer, Data Erase Onb, PowerSaving Sys, Engine, Ic Ctrl, Ic Key |
|
Network Security Level |
Level 0 (default), Level 1, Level 2, FIPS 140, Custom |
|
Auto Erase Memory Setting |
On |
NSA, DoD, Random Numbers |
Off (default) |
||
Erase All Memory |
NSA |
|
DoD |
||
Random Numbers |
Number of Erase: Between 1 to 9 (default: 3 times) |
|
Extend Auth.Mng. |
||
Transfer Log Setting |
On, Off (default) |
|
Collect Logs |
Job Log |
Active, Inactive (default) |
Access Log |
Active, Inactive (default) |
|
