Previous
This describes the parameters that can be set on [Security Options].
Extended Security
Specify whether or not to use the extended security functions. For details about the extended security functions, see "Specifying the Extended Security Functions", Security Guide.
Service Mode Lock
You can specify whether or not to prohibit entering service mode. This setting appears only when the user has logged in as the machine administrator.
Default: [Off]
On
Off
Firmware Version
You can display the firmware version of the printer.
Network Security Level
You can specify the network security level.
Default: [Level 0]
Level 0
Level 1
Level 2
FIPS 140
Auto Erase Memory Setting
You can specify whether or not to automatically delete the memory. When set to [On], specify the overwrite times. To specify the number of memory overwrites, select [Random Numbers]. This setting appears only when the optional hard disk is installed.
Default: [Off]
On
NSA
DoD
Random Numbers
Number of Erase: Between 1 to 9
Off
Erase All Memory
You can delete all data inside the memory. When deleting memory, specify the overwrite times. To specify the number of memory overwrites, select [Random Numbers]. This setting appears only when the optional hard disk is installed.
Default: [Random Numbers]
NSA
DoD
Random Numbers
Number of Erase: Between 1 to 9
Extend Auth.Mng.
For details about this function, see "Authentication Using an External Device", Security Guide.
Transfer Log Setting
You can specify whether or not to send log information to the log collection server.
Default: [Off]
On (Only available from the log collection server.)
Off
Collect Logs
You can specify whether or not to collect job logs and access logs.
Job Log
Default: [Inactive]
Active
Inactive
Access Log
Default: [Inactive]
Active
Inactive
For details, see Security Guide.
