Previous
Press the [Printer] icon on the [Home] screen.
Press the [Print Jobs] tab.
Select the type of document to print.
Press [Sample Jobs] to print a Sample Print file.
Press [Locked Jobs] to print a Locked Print file.
Press [Hold Jobs] to print a Hold Print file.
Press [Stored Jobs] to print a Stored Print file.
Select the type of document you want to print.
You can select all the Sample Print files at once by pressing [All Jobs] after selecting a file.
Press [Preview] to check the print image of the document as necessary.
Press [Print].
To print a Locked Print file, enter the password using the number keys, and then press [OK].
If multiple print files are selected, files that correspond to the entered password are printed. The number of files to be printed is displayed on the confirmation screen.
To print a password-protected Stored Print file, enter the password using the number keys, and then press [OK].
If multiple print files are selected, and some of these require a password, files that correspond to the entered password and do not require a password are printed. The number of files to be printed is displayed on the confirmation screen.
To change the print settings of the document, press [Det.Settings].
For details about the settings that can be configured, see Settings that can be configured on the control panel.
To change the number of copies, press [Change], and then enter a new number using the number keys.
Press [Resume Prt.].
If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.
If printing of a Hold Print file is scheduled at a certain time and you want to print the file before the time specified, print the document using the control panel.
To stop printing after printing has started, press [Exit] until the printer screen appears, and then press [Job Reset] or the [Suspend] key. The file will be deleted.
You can also print a file from Web Image Monitor. For details, see Web Image Monitor Help.
