Skip header
 

SNMPv3 Encryption

When using Device Manager NX or another application that communicates via SNMPv3, you can encrypt the transmitted data.

By making this setting, you can protect data from being tampered with.

1Log in as the network administrator from the control panel.

2Press [System Settings].

3Press [Interface Settings].

4Press [Down arrow keyNext].

5Press [Permit SNMPv3 Communication].

Operation panel screen illustration

6Press [Encryption Only].

7Press [OK].

8Log out.

Note

  • To use Device Manager NX for encrypting the data for specifying settings, you need to specify the network administrator's [Encryption Password] setting and [Encrypted Password] in [SNMP Account Setting] in Device Manager NX, in addition to specifying [Permit SNMPv3 Communication] on the machine. For details about specifying [Encrypted Password] in Device Manager NX, see Device Manager NX Help.

  • If network administrator's [Encryption Password] setting is not specified, the data for transmission may not be encrypted or sent. For details about specifying the network administrator's Encryption Password setting, see Registering and Changing Administrators.

PreviousNext